Turnkey Engines

1776cc rebuilt engine, counterweighted crank, AS41 block, 40x35.5 big valve heads, single HD spring, 009 with electronic ignition, dual 40mm kadrons, complete turn key less exhaust and clutch

Engine Case

• New AutoLinea or AS41 magnesium/aluminum case
• Dual oil pressure relief
• Full-flow oil passages
• Shuffle-pinned and align-bored as required
• Case savers installed

Crankshaft

• Forged 69 mm counterweighted crankshaft
• Dynamically balanced
• 8-dowel flywheel connection
• Heavy-duty chromoly gland nut

Connecting Rods

• Forged I-beam rods
• Balanced set
• ARP-style rod bolts (builder dependent)

Pistons & Cylinders

• 94 mm forged or hypereutectic pistons
• 94 mm thick-wall cylinders
• Three-ring piston design
• Balanced rotating assembly

Camshaft

Common choices include:

• Engle W110
• Engle W120
• CB Performance cams

These provide a strong mid-range powerband for street driving.

Cylinder Heads

• AutoLinea or performance dual-port heads
• CNC three-angle valve job
• 40 x 35.5 mm valves (common street setup)
• Dual valve springs
• Chromoly retainers

Valve Train

• Chromoly pushrods
• Solid rocker shafts
• HD rocker arms
• Heavy-duty lifters

Lubrication

• High-volume Schadek oil pump
• Stock or deep oil sump
• External oil filter (many builders)
• Oil capacity: approximately 2.5–3.5 quarts depending on sump configuration

Cooling

• Doghouse fan shroud
• Offset oil cooler
• Wide cooling fan
• Complete cooling tin
• Thermostat provisions (builder dependent)

Fuel System

• Dual Weber 40 IDF, EMPI HPMX 40, or Dellorto DRLA 40 carburetors
• Cross-bar linkage
• Performance intake manifolds
• High-flow air cleaners

Ignition

• Electronic distributor
• Electronic ignition module
• High-output ignition coil
• 8 mm performance plug wires
• NGK or Bosch spark plugs

• 130 Horse Power

2165cc engine W/ scat 78mm crank, chromoly flywheel, 5.325 H beam rods, FK87 cam, Stright cut gears, wiseco pistons in cima cylinders, stage 3 heads 42X37.5 valves, auto craft 1.4 rockers, 9.5:1 compression, new Weber 48 IDAs, Jaycee linkage, complete turnkey with AA side glow exhaust jet coated silver, making right at 170HP on Dyno

Specification	Typical Value
Engine Type	Volkswagen Type 1 Air-Cooled Flat-4
Displacement	2180 cc
Bore × Stroke	92 mm × 82 mm
Cooling	Air-cooled
Crankshaft	82 mm forged counterweighted stroker
Pistons & Cylinders	92 mm forged set
Cylinder Heads	Performance dual-port heads
Fuel System	Usually dual 44 mm carburetors or electronic fuel injection
Camshaft	Performance street cam
Exhaust	Merged header performance exhaust
Horsepower	Typically 170 hp